A softwall cleanroom is a room within a room. A steel or aluminum frame supports a ceiling grid fitted with fan filter units and lights. The walls are hanging vinyl curtains or strips, often clear or anti-static, that usually stop a short distance above the floor. Filtered air pushed in from the ceiling escapes under the curtains, keeping the enclosure at a slight positive pressure and carrying particles out.
Strengths:
- Quick to install, often without major building work.
- Relocatable and expandable as needs change.
- Lower cost than a hardwall room of the same size.
Softwall rooms are commonly used for ISO 7 and ISO 8 work, and can reach cleaner classes over small areas when filter coverage is high. Assembly, packaging, electronics and some medical device work suit them well.
Limits:
- Little control of pressure differences, and no real pressure cascade.
- Temperature and humidity depend largely on the host room's HVAC, and FFU heat adds to the load.
- Curtains are harder to clean and disinfect thoroughly than rigid panels, which limits their use in GMP aseptic work.
When a project needs tight pressure control, multiple rooms or regulated aseptic work, a hardwall or modular panel system is usually the better fit.
See softwall vs hardwall cleanrooms and the softwall cleanroom enclosure. Check that your target ISO class is realistic for the space before choosing.