Guides to fume hoods, casework and cleanrooms
80 practical guides for lab managers, EHS officers, architects and researchers. Also see the glossary and materials.
Fume hoods
How a laboratory fume hood works
How a fume hood captures and removes contaminants, what each part does, and the conditions that decide whether it actually protects the user.
4 min readFace velocity: what it measures and what it doesn't
What fume hood face velocity is, how to measure it properly, typical targets, and why a good reading does not prove that a hood contains.
4 min readASHRAE 110 containment testing explained
What the ANSI/ASHRAE 110 fume hood test involves, what AM, AI and AU results mean, and how to specify the test and read the report.
4 min readCSA Z316.5 and fume hoods in Canada
What CSA Z316.5 covers, how it fits with provincial rules and other standards, and how to use it when specifying and testing fume hoods.
4 min readBypass, CAV and VAV fume hoods compared
How conventional, bypass and variable air volume fume hoods respond to sash movement, and what each means for safety, energy and building controls.
4 min readHigh-performance low-flow hoods: when they pay off
How high-performance fume hoods contain at lower face velocity, where the energy savings are real, and when a standard hood is the better choice.
3 min readVertical, horizontal and combination sashes
How vertical, horizontal and combination fume hood sashes work, how each affects shielding and exhaust volume, and how to choose between them.
4 min readSash height and safe working habits
Practical fume hood habits for users and lab managers: sash position, where to work, what to keep out of the hood and how to respond to alarms.
4 min readBaffles and slot adjustment
What fume hood baffles do, how slot settings change the airflow, when adjustment makes sense, and how to inspect and clean the plenum behind them.
4 min readWhy airfoil sills matter
How the airfoil sill at the front of a fume hood prevents reverse flow at the work surface, and what users and maintenance staff can do to keep it working.
4 min readChoosing a fume hood liner
How to choose a fume hood liner by chemistry, heat and cleaning needs, comparing FRP, stainless steel, PVC and other common liner materials.
4 min readDuctless filtered fume hoods: uses and limits
How ductless filtered fume hoods work, where they are a sensible choice, where they are not, and the filter monitoring they depend on.
4 min readWalk-in fume hoods
When a floor-mounted walk-in fume hood is the right choice, and how to plan its sashes, floor, services, exhaust and safe use.
4 min readPerchloric acid hoods and washdown systems
Why heated perchloric acid needs a dedicated washdown hood, how the hood, duct and fan are built, and how to operate and decommission one safely.
4 min readRadioisotope fume hoods
How radioisotope fume hoods differ from standard hoods, from seamless stainless liners and shielding loads to filtered exhaust and CNSC licensing.
4 min readWhere to place fume hoods in a room
How to locate fume hoods away from doors, aisles and supply air, with the clearances, exit routes and nearby safety equipment to plan for.
5 min readCross drafts, diffusers and supply air
Why room air movement can defeat a fume hood, how diffusers, doors and people create cross drafts, and how to design for and check them.
4 min readExhaust ducts, fans and stacks
How fume hood exhaust systems are built: duct materials, fan location, dedicated versus manifolded fans, and stack height and discharge velocity.
4 min readAirflow monitors and alarms
How fume hood airflow monitors work, the main sensor types, where to set alarms, and how to keep monitors calibrated and trusted by users.
4 min readFume hood energy use and how to cut it
Why fume hoods use so much energy in Canadian labs, and the practical ways to cut it: VAV, sash management, low-flow hoods and heat recovery.
4 min readCommissioning and annual certification
What happens when a fume hood is commissioned and recertified each year: ASHRAE 110 test modes, face velocity checks, alarms, labels and records.
4 min readFume hood or biosafety cabinet?
How chemical fume hoods, biosafety cabinets and clean benches differ in what they protect, and how to choose for chemical, biological and mixed work.
4 min readBase cabinets under fume hoods
How to choose the cabinets under a benchtop fume hood: general, flammable and corrosive storage, vacuum pump and knee-space bases, and how to vent them.
4 min readFume hood services and fixtures
Planning water, gases, vacuum, power and drains for a fume hood: which services to specify, where controls belong and what to keep out of the hood.
4 min readHow many fume hoods, and how wide?
How to work out how many fume hoods a lab needs and which widths to choose, from the work done at each hood to the exhaust the building can supply.
4 min readFume hood maintenance checklist
A practical fume hood maintenance checklist by frequency, showing what users, lab staff, facilities and certifiers should check and when.
4 min readCommon fume hood mistakes
The most common fume hood mistakes in planning, purchasing and daily use, with simple fixes that protect users and keep hoods working as designed.
4 min readHoods for distillation and tall apparatus
Choosing a hood for distillation columns, reactors and other tall setups: distillation hoods, walk-in hoods, sash options and safe rigging.
4 min readFume hood noise and how to keep it down
Where fume hood noise comes from, from airflow at the opening to fans, VAV valves and diffusers, and the design steps that keep labs quieter.
4 min readRetrofit or replace an old fume hood?
How to assess an ageing fume hood and decide between repairs, upgrades such as VAV and airflow monitors, or full replacement.
4 min readCasework and lab planning
Lab casework buying guide
How to specify and buy lab casework: construction material, worktops, configuration, hardware, standards, lead times and questions for suppliers.
4 min readSteel, wood or phenolic casework?
Compare painted steel, wood and solid phenolic lab casework on moisture, chemicals, durability and repair, and see where each material fits best.
4 min readWhen stainless steel casework is worth it
Where stainless steel lab casework earns its higher cost, how grades 304 and 316 differ, and its limits with chlorides, acids and cleaning products.
4 min readSEFA 8 casework standards explained
What SEFA 8M, 8W and 8PH cover, what the casework tests check, what they leave out, and how to read a supplier's compliance claim.
4 min readStandard lab bench heights, depths and widths
Typical lab bench heights, depths, cabinet widths, toe kicks and overhead clearances in metric and imperial, and when to depart from them.
4 min readEpoxy resin vs phenolic resin worktops
How epoxy resin and phenolic resin lab worktops compare on chemicals, heat, weight, impact, sinks and edges, and the labs each one suits best.
4 min readChoosing a lab worktop by chemical and heat exposure
Match a lab worktop to the chemicals, heat, moisture and cleaning it will see, with an exposure table and a simple method for testing samples.
4 min readFixed, mobile or adaptable casework
How fixed, mobile and adaptable lab casework compare on cost, flexibility, services and safety, and how to choose the right mix for your lab.
4 min readIsland benches and wall benches
When to use wall benches, peninsulas or freestanding islands in a lab, how services reach each one, and what each means for circulation and egress.
4 min readAisle widths and clearances
Typical lab aisle widths for single and back-to-back work and carts, plus clearances around hoods, showers, doors, equipment and sprinklers.
3 min readPlanning a lab layout step by step
A step-by-step method for planning a lab layout, from the work program and hazards to fixed elements, benches, services, storage and user review.
4 min readLab modules: planning on a grid
What a lab module is, how its width and depth are derived, and how planning on a repeating grid keeps structure, services and casework flexible.
4 min readLab sinks, cup sinks and drainage
How to choose and place lab sinks, cup sinks and faucets, and what to check about chemical-resistant drain lines and sewer discharge.
4 min readReagent shelving: what to store overhead
What belongs on lab reagent shelves and what does not, plus typical shelf depths, heights, lips and seismic restraint for shelving above benches.
4 min readWall cabinets and glass-door storage
When to choose glass-door or solid-door wall cabinets in a lab, typical sizes and mounting heights, and what should never be stored in them.
4 min readDrawer configurations for lab storage
How to choose drawer heights, slides, locks and inserts for lab base cabinets, and how to balance drawers against door storage along a bench.
5 min readFlammable liquid storage cabinets
What a flammable storage cabinet does, the construction details to check, where to place it, whether to vent it, and how codes limit quantities.
4 min readAcid and corrosive storage cabinets
How to choose and place acid and base storage cabinets, which construction resists vapour attack, when to vent, and how to separate acids inside.
4 min readChemical segregation and compatible storage
How to sort lab chemicals into compatible storage groups, turn those groups into cabinets and shelves, and keep the system working after move-in.
4 min readEmergency showers and eyewash stations
Where to put emergency showers and eyewashes, the ANSI Z358.1 flow, height and temperature figures, and how to plan water supply, drainage and testing.
4 min readErgonomics at the lab bench
How bench height, knee space, seating, reach and task design reduce strain at the lab bench, with practical layout choices for standing and seated work.
4 min readLab service fixtures and outlets
The water, gas, vacuum, purified water and electrical fixtures found on lab benches, how they are mounted, and the safety details to plan for.
4 min readBalance tables and vibration control
What disturbs sensitive lab balances, how anti-vibration balance tables work, and where to place weighing stations for stable, repeatable readings.
4 min readPlanning a lab renovation
How to plan a lab renovation, from the program and existing-conditions survey to decommissioning, phasing, approvals and the schedule to move-in.
4 min readLead times, delivery and installation
What drives lead times for lab casework and fume hoods, how to prepare a site for delivery, the usual installation sequence and who does what.
4 min readBudgeting for lab casework and hoods
The cost drivers behind lab casework, worktops and fume hoods, how hood choices affect building costs, and how to build a realistic furniture budget.
4 min readAccessible and barrier-free lab work stations
How to design lab benches, sinks, hoods, safety equipment and circulation so people with disabilities can work safely and independently.
4 min readCleaning and caring for lab surfaces
Routine cleaning, disinfection and care for epoxy, phenolic and stainless worktops, casework finishes, sinks and hood interiors, and what to avoid.
4 min readBiosafety cabinet classes and types
Class I, II and III biosafety cabinets and Class II types A1, A2, B1, B2 and C1 compared, with guidance on choosing, placing and certifying them.
5 min readClean benches and PCR workstations
How laminar flow clean benches and PCR workstations protect work from contamination, why they do not protect the user, and how to lay out a PCR lab.
4 min readCleanrooms
ISO 14644-1 cleanroom classes explained
What ISO 14644-1 cleanroom classes mean, how particle limits scale from ISO 5 to ISO 8, and how to choose a class without over-specifying.
4 min readGMP cleanroom grades A to D
How GMP Annex 1 grades A, B, C and D compare with ISO classes, what each grade is used for, and what the grades mean for room design.
4 min readCleanroom windows: flush glazing done right
Why cleanroom windows sit flush on both faces of the wall, how sealed double-glazed units are built, and where windows earn their place in a suite.
4 min readCleanroom lighting: panels, teardrops and lux levels
How to choose cleanroom lighting: sealed flat panels or teardrop fixtures, typical light levels, ceiling coordination and room-side servicing.
4 min readFan filter units and ceiling coverage
How fan filter units work, how much of the ceiling they typically cover for each ISO class, and what to check on motors, filters, controls and noise.
4 min readCleanroom wall and ceiling systems
Modular panels, coated drywall, grid ceilings and walkable ceilings compared, with notes on panel cores, fire performance, joints and choosing a system.
4 min readCleanroom flooring and coving
Sheet vinyl, resin and static-control floors for cleanrooms, why integral coving matters, and how to prepare the slab so the floor lasts.
4 min readCleanroom doors and interlocks
Swing and hermetic sliding doors for cleanrooms, which way doors should open, how interlocks protect the pressure cascade, and how to keep egress safe.
4 min readPass-through chambers
Static, ventilated and decontamination pass-through chambers compared, with advice on interlocks, sizing, construction and safe transfer procedures.
4 min readAir showers: when they help
How cleanroom air showers work, what they can and cannot remove, where they earn their space, and what to check on noise, interlocks and egress.
4 min readDesigning a gowning room
How to lay out a gowning room around the gowning sequence, with the cross-over bench, sink, garment storage and pressure in the right places.
4 min readPressure cascades and airlocks
How pressure cascades keep air flowing from clean to less clean rooms, typical differentials, and when to use cascade, bubble or sink airlocks.
4 min readSoftwall vs hardwall cleanrooms
Softwall, rigid-wall and modular hardwall cleanrooms compared on pressure control, cleanliness, mobility, regulatory fit and cost drivers.
3 min readCleanroom HVAC and air change rates
How cleanroom air systems work, typical air change ranges by ISO class, why recovery and heat load matter more than one number, and how to save energy.
4 min readCleanroom certification and monitoring
What a cleanroom certification visit tests, how often rooms are requalified, how routine monitoring fills the gaps, and how to choose a certifier.
4 min readCleanroom furniture and stainless steel
How to choose cleanroom tables, shelving, seating and storage, when 304 or 316 stainless is the right grade, and which finishes clean best.
4 min readPharmacy compounding cleanrooms
How sterile compounding suites are laid out under the NAPRA model standards and USP chapters, including room classes, pressures and design details.
4 min readCleanroom cleaning and disinfection
How cleanroom programs combine detergents, disinfectants and sporicides, which techniques work, typical frequencies, and designing rooms that clean well.
4 min readPlanning a cleanroom budget
What drives cleanroom capital and operating costs, where budgets usually go wrong, and how to build an estimate that holds up as the design develops.
4 min readSealing penetrations, outlets and utilities
How to plan, seal and test every pipe, cable, sprinkler and outlet that passes through a cleanroom envelope, so the room holds pressure and cleans well.
4 min read