Lab and cleanroom glossary
63 terms you will meet in hood specifications, casework submittals and cleanroom drawings, defined in plain language.
A
Air changes per hour (ACH)
The volume of air supplied to or exhausted from a room in one hour, divided by the room's volume.
Air shower
An enclosed entry booth that blows high-speed HEPA-filtered air over people to remove loose particles from garments before cleanroom entry.
Airfoil sill
A shaped bar across the front edge of a fume hood work surface that streamlines incoming air and sweeps the surface behind it.
Airlock
A small room with doors at each end, placed between spaces of different cleanliness or containment to control airflow and contamination.
ANSI/ASHRAE 110
The standard test method for laboratory fume hood performance, combining smoke visualization, face velocity and tracer gas containment tests.
B
C
C-frame
A steel bench frame that is C-shaped in side view, supporting a worktop on rear legs so cabinets can hang or roll underneath.
Capture velocity
The air speed needed at the point where a contaminant is released to draw it into a local exhaust inlet such as a snorkel or slot hood.
Chemical-resistant laminate
A high-pressure laminate with a surface formulated to resist common lab reagents, bonded to a particleboard or MDF core for worktops.
Class II, Type A2
The most widely used biosafety cabinet type, protecting the user, the work and the room with inflow air and HEPA-filtered airflow.
Cleanroom coving
Rounded transitions at the joints between floors, walls and ceilings of a cleanroom that remove sharp corners where particles and microbes collect.
Constant air volume (CAV)
A fume hood exhaust arrangement in which the hood draws the same airflow at all times, regardless of sash position.
Containment
The ability of a fume hood, cabinet or room to keep hazardous vapours, particles or organisms inside and away from people.
Containment level (CL1 to CL4)
The four tiers of physical and operational requirements in Canada's biosafety standard for labs working with pathogens and toxins.
Corrosive
A substance that can destroy skin and eye tissue or attack metals on contact, such as strong acids and bases.
Coved work surface
A work surface whose inside corners and joints are rounded rather than square, so spills and residues cannot lodge in the seams.
CSA Z316.5
The Canadian standard for laboratory fume hoods and their exhaust systems, covering design, installation, testing and use.
Cup sink
A small drain basin set into a worktop or fume hood, used to take cooling water and small volumes of rinse water.
D
Diversity factor
The share of total possible fume hood exhaust that a VAV system is sized to deliver at once, since not every sash is fully open together.
Ductless filtration
An enclosure that draws contaminated air through carbon or HEPA filters and returns it to the room instead of exhausting it outdoors.
E
F
Face velocity
The average speed of air entering a fume hood through its sash opening, measured across the face in m/s or fpm.
Fan filter unit (FFU)
A self-contained ceiling module combining a fan and a HEPA or ULPA filter that supplies clean air to a cleanroom or clean zone.
Flammable liquid
Under fire codes, a liquid with a flash point below 37.8 °C (100 °F), so it can give off ignitable vapour at normal room temperatures.
Flush window
A cleanroom window set flush with the wall surface on one or both sides, leaving no sill or ledge where dust can settle.
Full overlay door
A cabinet door or drawer front that covers nearly the whole front of the cabinet box, leaving only narrow gaps between neighbouring fronts.
G
H
I
K
L
Lab module
A repeating planning unit, sized around benches and the aisle between them, used to lay out labs, structure and services on a regular grid.
Laminar flow
Smooth airflow moving in parallel streams at a uniform speed in one direction, used in clean benches and cleanrooms to sweep particles away.
M
Makeup air
Conditioned outdoor air supplied to a lab to replace the air removed by fume hoods and other exhaust, keeping room pressure in balance.
Marine edge
A raised lip around the edge of a lab worktop or fume hood work surface that keeps spills from running off onto cabinets and the floor.
Modesty panel
A vertical panel at the back of a knee space that closes off the area under a worktop and hides services and the wall behind.
N
P
Particle count
A measurement of the number of airborne particles in a volume of air, by size, used to classify and monitor cleanrooms.
Pass-through chamber
A small two-door cabinet built through a cleanroom or lab wall for moving materials between areas without people walking through.
Perchloric acid
A strong acid that becomes a powerful oxidizer when hot, and whose vapours can leave explosive perchlorate deposits in ordinary hoods and ducts.
Phenolic resin
A dense composite of paper layers saturated with phenolic resin and pressed under heat, used for lab worktops, shelves and casework.
Pressure differential
The difference in air pressure between two adjacent spaces, used to make air flow from cleaner to less clean areas or to keep hazards contained.
R
S
Sash
The movable glazed panel at the front of a fume hood that sets the size of the face opening and shields the user from splashes.
Sash stop
A mechanical stop that holds a vertical fume hood sash at its tested working height, with a manual override for loading equipment.
SEFA
The Scientific Equipment and Furniture Association, which publishes recommended practices for lab fume hoods, casework and work surfaces.
Seismic restraint
Anchors, bracing and retaining devices that keep casework, shelving, equipment and containers in place during an earthquake.
Self-closing door
A door that closes and latches on its own when released, a standard feature of flammable liquid storage cabinets.
Service chase
A concealed space behind or between lab benches that carries plumbing, gases, power and data to fixtures at the worktop.
Softwall cleanroom
A modular cleanroom with a free-standing frame, ceiling fan filter units and flexible vinyl curtain walls, usually set up inside an existing room.
T
Teardrop light
A slim LED luminaire with a teardrop-shaped cross-section, mounted on the ceiling grid between filters so supply air flows smoothly around it.
Toe kick
The recessed base at the bottom of a floor cabinet that lets people stand close to the worktop without hitting their toes.
Tracer gas
A gas released at a known rate inside a fume hood so that any leakage into the user's breathing zone can be measured.
U
V
Vacuum breaker
A backflow device on a lab faucet that admits air when supply pressure drops, so contaminated water cannot siphon back into the water lines.
Variable air volume (VAV)
A fume hood control approach that adjusts exhaust airflow as the sash moves, holding face velocity steady while cutting energy use.