Standard casework covers most of a lab. The rest is where custom design earns its place: an instrument that does not fit a standard bench, a wall that is not square, a process that needs its own enclosure, or a user who needs a work station that adjusts to them.
Our custom design service takes a requirement from sketch to installed product. We design around your equipment and room, prepare shop drawings for your approval, and coordinate fabrication with the rest of the project.
What the service covers
- Non-standard casework. Odd widths, depths and heights, corner units, filler panels and casework built to fit existing walls and columns.
- Instrument benches. Benches sized for specific analyzers, with service chases, cable management, cutouts for exhaust snorkels and access for maintenance.
- Worktops. Epoxy, phenolic and stainless worktops with custom cutouts, cup sinks, drip grooves, backsplashes and marine edges that contain spills.
- Stainless fabrication. Welded stainless worktops, sinks and tables for cleanrooms, wet areas and decontamination. See stainless steel 316 worktops.
- Enclosures and ventilated cabinets. Ventilated storage, equipment enclosures, drying cabinets and custom hood configurations, such as hoods for distillation and tall apparatus.
- Accessible stations. Height-adjustable benches, knee spaces, reachable controls and accessible sinks. Our guide to accessible lab design covers the basics.
- Mobile and adaptable items. Carts, mobile benches and frames sized to your equipment and doorways.
Custom items that carry loads, connect to building exhaust or need anchoring are reviewed with the project's engineer of record. Any stamped design is prepared by a professional engineer licensed in your province, and the local authority having jurisdiction has the final word on code questions.
How it works
- Brief. You tell us what the item has to do, what it holds or protects, and any constraints of space, budget or schedule.
- Site measurements. We measure the room, existing services and the equipment that will sit on or in the item.
- Concept. We sketch options in 2D and 3D, often inside the lab planner, so you can see the item in its room.
- Shop drawings. We prepare plans, elevations, sections and details, with materials, finishes and hardware called out. You review and approve them before anything is built.
- Samples and mock-ups. For larger runs or unusual items we provide material samples or a mock-up for users to test.
- Fabrication. Approved drawings are released to production, with dimensions checked against site conditions.
- Delivery and installation. The item is installed with the rest of the casework and checked against the drawings.
What you receive
- Concept sketches and a 3D model
- Shop drawings with plans, elevations, sections and details
- Material, finish and hardware schedule
- Worktop drawings showing cutouts, sinks, fixtures and service locations
- Installation drawings and anchorage details where needed
- Care and maintenance instructions for each material
Typical projects
- Instrument benches for a mass spectrometry or chromatography suite
- A run of casework that fits around building columns and window sills
- A stainless sink and worktop assembly for a glasswash room
- A height-adjustable station for a teaching lab
- A ventilated enclosure for a process that does not fit a standard hood
- Custom mobile carts sized to move equipment through narrow doors
Good to know
Custom items take longer than catalog items, because drawings need approval before fabrication starts. Bringing custom needs into the project early keeps them off the critical path. Where a catalog product can be adapted with a filler, a different worktop or a modified cutout, that is often the faster and simpler route.
To talk through a custom requirement, request a consultation.