LaboratoryEquipment.caCasework · Fume hoods · Cleanrooms Placeholder data
Glossary

Chemical-resistant laminate

A high-pressure laminate with a surface formulated to resist common lab reagents, bonded to a particleboard or MDF core for worktops.

Chemical-resistant laminate looks much like an ordinary plastic laminate countertop, but its top layer is formulated to resist spot exposure to many acids, bases, solvents and stains. A thin sheet of it is bonded to a substrate, typically particleboard or MDF, with moisture-resistant grades preferred.

It is usually the least expensive of the common lab worktop options, and it works well where chemical exposure is light and the surface stays mostly dry:

  • Write-up areas and instrument benches.
  • Dry biology, physics and electronics labs.
  • School science rooms with limited chemical use.

Its weak points are the substrate and the joints. Water that gets into seams, edges, sink cutouts or fastener holes swells the core, and the damage cannot be repaired in place. Laminate also tolerates less heat than solid materials and cannot be refinished once scratched or burned.

Avoid it at sinks, in fume hoods, under hot plates and wherever solvents or corrosives are handled in volume. Choose phenolic resin or epoxy resin instead, or stainless steel where heat and hygiene matter most.

See choosing a lab worktop by chemical and heat exposure for a side-by-side view, and the high school science lab for a typical application.