LaboratoryEquipment.caCasework · Fume hoods · Cleanrooms Placeholder data
Glossary

Phenolic resin

A dense composite of paper layers saturated with phenolic resin and pressed under heat, used for lab worktops, shelves and casework.

Solid phenolic panels are made by stacking sheets of kraft paper impregnated with phenolic resin, adding a chemical-resistant surface layer, and pressing the stack under heat and high pressure. The result is a dense, uniform panel with no wood core. Lab worktops are commonly 19 mm (¾ in) or 25 mm (1 in) thick.

Strengths:

  • Good resistance to most everyday lab reagents, disinfectants and moisture.
  • Lighter than epoxy for the same size, so easier to handle and install.
  • Strong and impact-resistant, with durable edges.
  • Also used for whole cabinets, under SEFA 8PH, which suits wet, humid or frequently disinfected rooms.

Limits:

  • Lower heat tolerance than epoxy. Use heat-resistant pads under hot plates and other hot equipment.
  • Chemical resistance depends on the surface formulation, which varies by manufacturer. Check the supplier's resistance data for your specific chemicals.
  • Deep cuts can expose the core, which may differ in colour from the surface and cannot be refinished like a solid-colour material.

Phenolic is common in biology, clinical, teaching and general-purpose labs. See epoxy resin vs phenolic resin worktops, the phenolic resin worktop and solid phenolic casework pages, and compare with epoxy resin.