LaboratoryEquipment.caCasework · Fume hoods · Cleanrooms Placeholder data
Glossary

Marine edge

A raised lip around the edge of a lab worktop or fume hood work surface that keeps spills from running off onto cabinets and the floor.

A marine edge is a low raised rim along the front, and sometimes the sides, of a work surface. It turns the top into a shallow tray, so a spilled liquid stays on the surface instead of running down cabinet fronts and onto the floor and people's feet.

Where it is used:

  • Fume hood work surfaces, which are commonly dished with raised edges on all sides.
  • Sink areas and wet benches.
  • Benches where large volumes of liquid are handled routinely.

On epoxy resin tops the edge is cast in as one piece. On phenolic and stainless steel it is machined, built up, formed or welded, depending on the material.

Marine edges are not right for every bench. They make it harder to wipe debris off the front of the surface, they get in the way when sliding heavy equipment on and off, and they add cost. Many labs use them only at hoods, sinks and dedicated wet areas, with flat tops elsewhere.

A related detail is the drip groove, a small channel cut under the front edge so liquid running off the top drips free instead of following the underside back onto cabinet doors.

See choosing a lab worktop, the epoxy resin worktop, and how marine edges pair with cup sinks in wet areas.