LaboratoryEquipment.caCasework · Fume hoods · Cleanrooms Placeholder data
Glossary

Epoxy resin

A cast, solid lab worktop material with strong resistance to a wide range of chemicals, moisture and heat.

Epoxy resin worktops are cast from a mix of epoxy resin and fillers, mostly silica, then cured into a solid slab with the same colour all the way through. Slabs are commonly 25 mm (1 in) thick. Black is traditional; grey, white and other colours are available.

Epoxy is the long-standing default for wet chemistry. Strengths:

  • Broad resistance to acids, bases and organic solvents.
  • Better heat resistance than phenolic or laminate tops.
  • No core to swell, so it handles standing water and sinks well.
  • Can be cast with a marine edge, drip groove, integral backsplash or moulded sink.

Limits:

  • It is heavy, so casework and frames must be rated for the load, and installation takes more labour.
  • It can chip or crack from impact or sudden local heating.
  • Hydrofluoric acid attacks silica-filled surfaces, and some strong oxidizers can etch or discolour it.
  • Scratches and wear dull the finish over time.

Epoxy is common on fume hood work surfaces, at sinks and on benches in chemistry, analytical and teaching labs. For drier biology or clinical work, phenolic resin is often the lighter alternative.

Compare the two in epoxy resin vs phenolic resin worktops and see the epoxy resin worktop material page.