Labs need many services at the bench: hot and cold water, purified water, vacuum, compressed air, specialty gases, natural gas, drains and vents, power and data. A service chase is the space that carries them from the building's distribution to the fixtures.
Common arrangements:
- Wall benches: a narrow chase between the back of the casework and the wall, often closed with a removable back panel or a top cover.
- Island benches: a central spine between the two sides, with fixtures on its uprights or on a raised service ledge.
- Overhead: service carriers or ceiling panels drop services down to adaptable benches, leaving the floor clear.
Why the chase deserves attention early:
- Its depth affects overall bench depth and aisle widths.
- Valves, shut-offs, junction boxes and cleanouts must be reachable without removing casework. Plan access panels where they are.
- Each bench or zone should have its own isolation valves so one leak does not shut down a whole lab.
- Lines should be labelled at the access points.
Chase sizes and routing are coordinated with the mechanical, plumbing and electrical engineers. In a lab module layout, chases usually line up from module to module so services can be extended later.
See lab service fixtures and outlets, island benches and wall benches and the modesty panel.