Lab faucets are often connected to hoses that run into condensers, baths, flasks or sinks. If the water supply pressure drops, for example during a main break or heavy hydrant use, a submerged hose can act as a siphon and draw lab liquids back into the building's piping. A vacuum breaker on the faucet outlet prevents this. When pressure falls, it opens to the atmosphere and breaks the siphon.
Most lab faucets with serrated hose ends include an integral vacuum breaker. Some types briefly drip from their vents when the faucet closes. That is normal, and the device should not be removed or plugged to stop it.
Backflow protection in labs usually works at two levels:
- At the fixture: vacuum breakers on faucets and hose connections.
- At the building or zone: a backflow preventer separating lab water from the potable supply, as required by the plumbing code and the local water authority.
Requirements for lab water and backflow testing vary by province and municipality, so the plumbing engineer and the local authority set the final arrangement.
Practical points:
- Keep hose ends out of liquid when the faucet is not in use.
- Check that replacement faucets include vacuum breakers.
See lab service fixtures and outlets, gooseneck faucets and lab sinks and drainage.