ULPA stands for ultra-low penetration air. ULPA filters use the same pleated glass-fibre construction as HEPA filters but with finer, denser media, which lets fewer particles through.
Definitions vary by rating system:
- North American practice commonly defines ULPA as at least 99.999% efficient on particles around 0.1 to 0.2 µm.
- EN 1822 and ISO 29463 rate filters at their most penetrating particle size, with ULPA classes from U15 upward, each more efficient than H14.
ULPA filters are mainly used where the ISO class is very clean, such as ISO 4 and cleaner, which mostly means semiconductor, microelectronics and some optics and nanotechnology work. Pharmaceutical cleanrooms and pharmacy compounding rooms normally rely on HEPA filters.
Trade-offs to weigh:
- Higher resistance to airflow, so more fan energy for the same airflow.
- Higher filter cost and more care in handling and installation.
- A tighter filter does not fix leaks, poor sealing or weak gowning practice. For most ISO 5 to 8 rooms, well-installed HEPA filters are sufficient.
Like HEPA filters, installed ULPA filters are leak-tested after installation and periodically afterwards.
See fan filter units and ceiling coverage and the electronics and semiconductor cleanroom.