Phenolic resin worktops are lighter and tougher than epoxy, resist a broad range of lab chemicals and are easy to machine. They have become a common choice for biology labs, teaching labs and adaptable furniture. Their main limit is sustained heat.
How it is made
Layers of kraft paper are saturated with phenolic resin, stacked and pressed under high heat and pressure until the resin cures into a dense, solid panel. A chemical-resistant surface layer, made with a resin formulated for lab use, is pressed on as part of the same process. Common thicknesses are 19 mm (¾ in) and 25 mm (1 in).
The panel is cut and machined to size, with edges profiled, drip grooves routed and cutouts made for sinks and fixtures. Because it machines cleanly, phenolic can be trimmed and adjusted on site more easily than epoxy. The same family of material is used for solid phenolic casework.
Performance
Chemicals. Phenolic worktops resist most acids, bases, solvents and disinfectants found in biology and general labs. Resistance is concentrated in the surface layer, so deep scratches and cut edges are more exposed. Concentrated oxidizing acids left on the surface can mark it.
Heat. This is the main weakness. Prolonged heat from hot plates, heating blocks or hot glassware can blister, discolor or delaminate the surface. Use heat-resistant pads, and choose epoxy or stainless where hot work is routine.
Moisture. The panel is unaffected by water. Cutouts and edges should be sealed, especially around sinks.
Impact. Phenolic is tough and much less likely to chip or crack than epoxy, which suits busy teaching labs. It is also lighter, which matters for mobile and adjustable furniture.
Where it suits
- Biology, microbiology, cell culture and molecular labs
- School science and university teaching labs
- Adaptable C-frame benches and mobile tables
- Instrument benches and dry labs
- Projects where weight or on-site fitting is a concern
Where it does not
- Routine high-heat work, such as hot plates running all day
- Fume hood work surfaces used for heated digestions
- Heavy, concentrated acid work, where epoxy resin is usually the better choice
Phenolic or epoxy?
| Need | Better choice |
|---|---|
| Frequent heat | Epoxy |
| Impact and dropped items | Phenolic |
| Light weight for mobile benches | Phenolic |
| Broadest chemical range | Epoxy |
| On-site trimming | Phenolic |
Many labs use both: epoxy in hoods and wet chemistry runs, phenolic on biology benches and mobile tables. The epoxy vs phenolic worktops guide covers this in more depth, and choosing a lab worktop adds stainless and other options.
Care and cleaning
- Clean with mild detergent and water, then dry.
- Common lab disinfectants, including alcohols and diluted bleach, are generally fine. Rinse off residues.
- Avoid abrasive pads and scouring powders.
- Keep hot items on pads or trivets.
- Wipe up concentrated acids and oxidizers right away.
More detail is in cleaning and caring for lab surfaces.