LaboratoryEquipment.caCasework · Fume hoods · Cleanrooms Placeholder data
Glossary

Cup sink

A small drain basin set into a worktop or fume hood, used to take cooling water and small volumes of rinse water.

A cup sink is a small oval or round basin, commonly about 75 by 150 mm (3 by 6 in), set into a bench top, a fume hood work surface or a raised service ledge. It is usually made of epoxy resin or polypropylene and drains through a small tailpiece and trap into the lab's chemical-resistant drain system.

Typical uses:

  • Taking return water from condensers and other water-cooled apparatus.
  • Draining water aspirators.
  • Rinsing small items near a water outlet.

A cup sink is not a disposal point for chemicals. Chemical waste goes into labelled containers under the organization's waste program, and what may go down any lab drain is set by the EHS office and municipal sewer bylaws.

Practical points:

  • Place cup sinks next to the water outlet they serve, especially in fume hoods.
  • Traps in rarely used cup sinks dry out and let sewer odours into the lab. Run water through them regularly.
  • Keep tubing ends above the rim so they cannot siphon back into the supply; a vacuum breaker on the faucet adds protection.

See lab sinks, cup sinks and drainage and fume hood services and fixtures.