LaboratoryEquipment.caCasework · Fume hoods · Cleanrooms Placeholder data
Glossary

Coved work surface

A work surface whose inside corners and joints are rounded rather than square, so spills and residues cannot lodge in the seams.

A cove is a rounded fillet where two surfaces meet, such as where a work surface turns up into a backsplash or where the floor of a hood meets its walls. A coved work surface uses these radiused joints instead of square corners and open seams.

Square inside corners and butt joints collect liquid, powder and grime. They are hard to wipe clean and even harder to decontaminate fully. A coved surface lets a cloth reach every part of the corner, and continuous seams leave nowhere for contamination to hide.

Where coved surfaces are common:

  • Radioisotope fume hoods, which typically have one-piece stainless steel work surfaces with coved corners and raised edges to contain spills and simplify decontamination.
  • Perchloric acid hoods, where the liner and work surface are seamless so deposits can be washed away.
  • Stainless steel worktops in hygienic, pharmacy and food testing settings, with welded, ground and polished seams.
  • Epoxy resin tops cast with an integral coved backsplash.

Where nuclear substances are used under a CNSC licence, work surfaces are expected to be smooth, non-absorbent and easy to decontaminate, and coving is a common way to achieve that.

See radioisotope fume hoods, the stainless steel 316 worktop, cleanroom coving and cleaning and caring for lab surfaces.