Stainless steel casework has no coating to chip and no core to swell. It handles heat, steam, water and repeated disinfection, which is why it is standard in cleanrooms, sterile areas and wet process rooms. Type 304 is the usual grade for casework.
What it is and how it is made
Type 304 is an austenitic stainless steel containing roughly 18% chromium and 8% nickel. The chromium forms a thin, self-healing oxide layer that protects the surface. Cabinets are formed from sheet, then welded and ground. Finishes are usually a brushed No. 4 finish for general labs, or electropolished for cleanroom furniture where a smoother, more cleanable surface is wanted.
Well-made stainless casework keeps horizontal ledges, open seams and exposed fasteners to a minimum, so there are fewer places for dirt and microorganisms to collect.
Performance
Moisture and heat. Excellent. Stainless handles steam, hot water, wet cleaning and high humidity without damage.
Disinfectants. Alcohols, hydrogen peroxide and quaternary ammonium products are generally well tolerated. Bleach and other chloride-based products can cause pitting and staining if left on the surface, so they should be rinsed off.
Chemicals. Stainless resists many chemicals, but hydrochloric acid and other chloride-rich chemistry attack it, and 304 is more vulnerable than 316.
Impact. Stainless is strong and does not crack. It can dent, and scratches stay visible.
304 or 316?
| Property | 304 | 316 |
|---|---|---|
| Composition | Chromium and nickel | Adds molybdenum |
| Chloride resistance | Moderate | Better |
| Typical use | Casework, tables, cabinets | Worktops, hood liners, harsh wet areas |
| Relative cost | Lower | Higher |
Most labs use 304 for cabinets and frames and reserve stainless steel 316 worktops for surfaces that see the harshest exposure.
Where it suits
- Cleanrooms, including stainless tables, gowning benches and garment cabinets
- Microbiology, cell culture and containment suites with frequent decontamination
- Pharmacy compounding, food testing and wet process rooms
- Autoclave, glasswash and cage wash areas
- Radioisotope labs, where surfaces must be easy to decontaminate
Where it does not
- Rooms with heavy hydrochloric acid or chlorine vapor
- Budget-driven dry labs, where painted steel performs well at lower cost
- Spaces where a clinical look or glare is a concern
When to choose stainless is covered in when stainless steel casework is worth it, and cleanroom furniture is covered in cleanroom furniture and stainless steel.
Care and cleaning
- Clean with mild detergent and water and wipe in the direction of the grain.
- Rinse with clean water after bleach or chloride-based disinfectants, then dry.
- Never use steel wool or carbon steel brushes. Embedded iron particles rust and look like corrosion of the stainless itself.
- Remove light tea staining with a stainless cleaner made for the purpose.
- Ask your supplier about passivation if surfaces show persistent rust spots.
See our stainless cleanroom work table for an example of open, wipe-down construction.