LaboratoryEquipment.caCasework · Fume hoods · Cleanrooms Placeholder data
Materials · Liner

Stainless steel fume hood liners

Type 316 stainless steel fume hood liners explained, covering welded construction, use in perchloric and radioisotope hoods, chloride limits and care.

A stainless steel liner turns the inside of a fume hood into a smooth, welded metal shell. It tolerates heat, washes down with water and can be decontaminated thoroughly. That makes it the standard for perchloric acid and radioisotope hoods, and a good option for some high-heat and biological work.

How it is made

Stainless liners are usually Type 316, which contains molybdenum for better resistance to chlorides than Type 304. Panels are formed and welded, and the welds are ground and finished so the interior has few seams. Corners are often coved, meaning rounded rather than square, so residues cannot lodge in them.

Specialty hoods build on this shell:

  • Our perchloric acid hood pairs a welded 316 liner with an integral washdown spray system and a coved work surface draining to a trough. Washdown removes perchlorate residues before they can build up.
  • Our radioisotope fume hood uses a seamless stainless liner and a coved stainless work surface reinforced to carry lead shielding.

Performance

Heat. Excellent. Stainless does not burn, soften or blister under hot plates and heated processes.

Decontamination. Excellent. Smooth, welded, non-porous surfaces are the easiest to clean, which matters for radioactive contamination and residues.

Moisture. Unaffected by water, so washdown systems can run without damaging the liner.

Chemicals. Stainless resists many acids, bases and solvents. Hydrochloric acid, aqua regia, hydrofluoric acid and chloride-rich vapors attack it, even in grade 316.

Impact. Strong and difficult to damage, though it can dent.

Where it suits

  • Perchloric acid work, together with washdown and a dedicated exhaust
  • Radioisotope work licensed by the CNSC
  • High-heat processes and heated digestions that do not involve chlorides
  • Pharmaceutical and biological work that needs frequent disinfection

Where it does not

  • Acid digestions with hydrochloric acid or aqua regia, where a PVC liner holds up better
  • General chemistry on a tight budget, where a fiberglass liner does the job
  • Hoods exposed to heavy chlorine or chloride vapor

Which hood needs which liner?

WorkUsual linerWhy
Perchloric acidStainless 316 with washdownNon-combustible, washable
RadioisotopesSeamless stainlessEasy to decontaminate
Hydrochloric acid digestionPVCResists chlorides
General chemistryFiberglassBroad resistance

Our guides to perchloric acid hoods and choosing a fume hood liner explain each case in more detail. The radiation safety officer or EHS team should confirm the liner choice for specialty work.

Care and cleaning

  • Wipe down with mild detergent and water and rinse.
  • Rinse well after chloride-containing cleaners or spills, then dry.
  • Run perchloric washdown cycles as the operating procedure requires, usually after each use.
  • Never use steel wool or carbon steel brushes.
  • Inspect welds and drains during annual hood testing.