The liner is the inside skin of a fume hood: the walls, ceiling and baffles that vapors touch before they leave through the exhaust. Fiberglass is the standard liner for general-purpose hoods. It handles the mix of chemistry found in most labs at a reasonable cost.
How it is made
Fiberglass liners are made from fiberglass-reinforced polyester. Glass fiber reinforcement is bound in a thermoset polyester resin, usually with fire-retardant additives, and molded or pressed into panels with a smooth, sealed face. Panels are fitted into the hood structure, and the joints are sealed so vapors and condensate cannot reach the outer steel.
Fiberglass is the standard liner on our benchtop bypass fume hood and high-performance hoods. Stainless and PVC are offered for specialized work.
Performance
Chemicals. Fiberglass resists the vapors of most common acids, bases and solvents at the concentrations typical in general chemistry. Hot, concentrated acids, hydrofluoric acid, which attacks glass fibers, and some aggressive solvents degrade it over time.
Heat and fire. Fiberglass tolerates the warmth of normal hood use. Ask the supplier for the liner's flame spread rating; a low rating is what you want inside a hood.
Moisture. Unaffected by water and condensate.
Impact. Heavy blows can crack or craze the surface, and damage lets chemicals reach the reinforcement underneath.
Where it suits
- General chemistry, analytical and teaching labs
- Biology and QC labs that use hoods for solvents and reagents
- Most hoods where no single aggressive chemical dominates
Where it does not
- Perchloric acid work, which needs a welded stainless liner, washdown and a dedicated exhaust. Organic materials can react with perchlorate residues.
- Radioisotope work, where a seamless stainless steel liner is easier to decontaminate
- Routine acid digestions with hydrochloric or hydrofluoric acid, where a PVC liner holds up better
- High-heat processes that keep the liner hot for long periods
Liner comparison
| Liner | Strengths | Limits | Typical use |
|---|---|---|---|
| Fiberglass | Broad resistance, standard option | Hydrofluoric acid, high heat, impact | General chemistry |
| Stainless 316 | Heat, decontamination, washdown | Hydrochloric acid, chlorides | Perchloric, radioisotope |
| PVC | Mineral acids | Heat, many solvents | Acid digestion |
Our guide to choosing a fume hood liner explains how to match a liner to your chemical list.
Care and inspection
- Wipe the liner with mild detergent and water during routine hood cleaning.
- Clean up spills on the work surface and lower liner promptly.
- Look for crazing, cracks, blistering, discoloration and failed sealant at joints.
- Check around service fixtures and light openings, where damage often starts.
- Record findings during annual testing so slow deterioration is caught early.
The fume hood maintenance checklist puts liner checks into a full routine.