LaboratoryEquipment.caCasework · Fume hoods · Cleanrooms Placeholder data
Lab type · 14 × 10 m starting room

Kilo lab and pilot plant

Planning a kilo lab or small pilot plant: walk-in hoods for reactors, solvent storage, ventilation, static control, services and Canadian code points.

Kilo lab and pilot plant starting layout in 3D

A kilo lab sits between the research bench and the plant. Process chemists and engineers scale reactions from grams to kilograms, make material for toxicology studies or early clinical supply, and prove out a process before it moves to a pilot plant or a contract manufacturer. Pharmaceutical and fine chemical companies, contract manufacturers and some universities run them. The equipment is laboratory glass at large scale: jacketed reactors of roughly 10 to 100 L (about 3 to 26 US gal), large rotary evaporators, filters and dryers, all inside walk-in hoods.

Hazards and containment

Scale changes the risk. A runaway reaction, a cracked reactor or a solvent spill involves litres, not millilitres. The main hazards are:

  • Large volumes of flammable solvents, and the static charge that builds up when they are pumped or poured
  • Exothermic reactions and pressure build-up
  • Toxic or potent compounds during charging, sampling and filtration
  • Heavy lifting of drums and vessels
  • Very cold and very hot heat-transfer fluids from chillers and thermostats

Every operation with open solvent belongs inside a walk-in fume hood, with the sashes closed while reactions run. Ground and bond reactors, drums and transfer lines. Charge potent solids in a ventilated enclosure or through a closed transfer system. Each process should go through a hazard review before it runs at scale.

Equipment and casework

  • Walk-in hoods, commonly 1.8 to 2.4 m (6 to 8 ft) wide, with reactor frames standing on the floor inside
  • Chillers and thermostats beside or behind the hoods
  • A benchtop hood for weighing, sampling and small reactions
  • Instrument benches for in-process testing by HPLC and GC
  • Flammable cabinets for working stock, with bulk solvent kept in a rated storage room
  • A corrosives cabinet on a different wall
  • A work-up island and mobile tables for staging carts and drums

Layout principles

Give the walk-in hoods the long wall farthest from the door, and leave a wide clear zone in front of them: at least 1.5 m (5 ft), and more where reactors and drums are wheeled in. Walk-in hoods open down to the floor, so supply air and foot traffic near them affect containment more than they would at a benchtop hood. Keep the route from the door to the hoods clear for equipment moves, and use double doors wide enough for the largest reactor frame.

Place in-process instruments and paperwork stations away from the hoods. Keep flammable storage close to the hoods but out of the exit path, and keep corrosives on another wall. Put the emergency shower and eyewash near the exit and within 10 seconds of every hood. Ceiling height matters too: walk-in hoods and tall reactor frames need a ceiling of at least 3 m (10 ft), plus space above for ducts.

Finishes and worktops

Epoxy resin worktops resist solvents, acids and heat at benches and sinks. Walk-in hoods have no worktop, so the choice there is the liner: fiberglass for solvent and general work, or stainless where the process calls for it. Painted steel casework is durable and adds little fuel to a fire. Floors should be chemical-resistant and seamless, and static dissipative where solvents are transferred.

Utilities and services

Kilo labs are service-heavy:

  • High exhaust volumes for several walk-in hoods, which drive large make-up air and energy costs; see fume hood energy use
  • Nitrogen for inerting, plus vacuum and compressed air at each hood
  • Chilled and cooling water, or space and power for local chillers
  • Three-phase power, with electrical equipment rated for the area classification your engineer assigns
  • Grounding points at each hood and drum station
  • Drains with spill containment so a spill cannot reach the sewer

Compliance points in Canada

The National Fire Code of Canada, NFPA 30 and NFPA 45 limit flammable liquid quantities and set storage and fire protection rules. A kilo lab often reaches those limits, which is why bulk solvent lives elsewhere. Walk-in hoods should be certified against CSA Z316.5 and tested to ANSI/ASHRAE 110. If the lab makes material for clinical use, good manufacturing practice expectations shape cleaning, documentation and finishes. The engineer of record and the local fire authority have the final say on classification and quantities.

About the starting layout

The 3D starting layout is a 14 by 10 m (46 by 33 ft) room with a 3.6 m (11 ft 10 in) ceiling, three 2.4 m walk-in hoods along the back wall and a fourth on the side, a benchtop hood for sampling, in-process instrument benches, two flammable cabinets, a corrosives cabinet on another wall, a wide double doorway and a work-up island with a staging table. Adapt it in the lab planner or book a consultation to size hoods and exhaust for your process.

Starting layout: bill of materials

30 items in a 14 × 10 m room with a 3.6 m ceiling. Budgetary list prices; adjust anything in the planner.

CodeProductQtyUnit
AB-CF-1800Adaptable C-frame bench
Painted steel, Arctic white · Epoxy resin, black
2$5,360
BC-4D-0900Base cabinet, 4 drawers
Painted steel, Arctic white · Epoxy resin, black
3$2,270
BC-DD-0900Base cabinet, drawer over doors
Painted steel, Arctic white · Epoxy resin, black
2$1,900
BC-HD-0900Base cabinet, hinged doors
Painted steel, Arctic white · Epoxy resin, black
3$1,760
BC-KS-1200Knee space with modesty panel
Painted steel, Arctic white · Epoxy resin, black
1$1,110
BC-SK-1200Sink base with epoxy sink & faucet
Painted steel, Arctic white · Epoxy resin, black
1$3,180
ES-CB-0600Emergency shower & eyewash1$1,850
FH-BP-1800Benchtop fume hood, bypass
Painted steel, Arctic white · Fiberglass liner
1$12,100
FH-WI-1800Walk-in fume hood
Fiberglass liner
1$21,500
FH-WI-2400Walk-in fume hood
Fiberglass liner
3$24,800
IB-RS-3600Island bench with reagent shelving
Painted steel, Arctic white · Epoxy resin, black
1$17,280
MT-C-1800Mobile lab table
Epoxy resin, black
1$2,180
SC-CR30-1090Corrosives cabinet, 30 gal1$2,290
SC-FL45-1090Flammable liquids cabinet, 45 gal2$2,480
TC-ST-0900Tall storage cabinet
Painted steel, Arctic white
3$2,050
WC-GL-0900Wall cabinet, glass doors
Painted steel, Arctic white
1$1,080
WC-GL-1200Wall cabinet, glass doors
Painted steel, Arctic white
1$1,290
WC-SD-0900Wall cabinet, solid doors
Painted steel, Arctic white
1$950
WC-SD-1200Wall cabinet, solid doors
Painted steel, Arctic white
1$1,140
Starting layout total$178,070

Key products for this lab