The 1200 mm model
BC-KS-1200 is the 1200 mm (47 in) wide version of the knee space with modesty panel. It is 560 mm deep and 900 mm high, floor-standing. It also comes in 900 mm, 1500 mm.
Price by option at 1200 mm
| Option | Choice | List price |
|---|---|---|
| Finish | Painted steel, Arctic white | $1,110 |
| Finish | Painted steel, Slate blue | $1,110 |
| Finish | Solid phenolic, Pearl grey | $1,190 |
| Finish | Maple veneer | $1,160 |
| Finish | Stainless steel 304 | $1,390 |
| Worktop | Epoxy resin, black | $1,110 |
| Worktop | Phenolic resin, charcoal | $980 |
| Worktop | Stainless steel 316 | $1,440 |
| Worktop | No worktop | $610 |
What it's for
A knee space turns part of a standing-height bench into a seated workstation: a place to write up notebooks, use a microscope, run an instrument's computer, or do fine manual work that is tiring on your feet. The worktop stays continuous above, so the bench reads as one surface while leaving room for legs below.
Construction and features
The unit is an open knee space under the worktop, framed by three parts:
- An apron rail under the front edge of the worktop. It stiffens the top across the opening so it does not sag over a long span, and keeps the front edge in line with the cabinets on either side.
- A modesty panel that closes off the view of the wall, pipes and cables at the back.
- A removable back panel, so services in the wall or a service chase can be reached without dismantling the bench.
In good-quality casework, the knee space shares the finish and leveling system of the adjacent cabinets, so the worktop stays flat across cabinets and opening alike. Check how the worktop is supported at each side of the opening, and confirm that the apron rail leaves enough thigh clearance for the chairs or stools you plan to use.
Sizes and options
Widths are 900, 1200 and 1500 mm (35½, 47¼ and 59 in), at 560 mm (22 in) deep, under a worktop at 900 mm (35½ in). A 900 mm opening is a compact single seat. 1200 mm gives one person room for a monitor and a notebook. 1500 mm suits a microscope station with space beside it, or a short-term shared position.
Options are the finish (painted steel, solid phenolic, maple veneer or stainless 304, usually matched to the adjacent cabinets) and the worktop (epoxy resin, phenolic resin, stainless 316, or none under a continuous top).
Where it fits
Seated positions are central to a histology and pathology lab, where microscopy and slide review take long stretches, and to an analytical chemistry lab, where analysts sit at instrument data stations. A forensic science lab uses them for examination, note-taking and report writing.
Planning notes
- At 900 mm the worktop is standing height. Seated users need a lab chair or stool with a footrest. For long seated tasks, consider an adaptable C-frame bench that can be set lower; see ergonomics at the lab bench.
- A barrier-free workstation needs a lower worktop than 900 mm and clear knee room to the depth your accessibility requirements set. Plan it as a separate, lowered section.
- Place a drawer unit beside each knee space so the seated person has storage within reach.
- Keep floor drains, cleanouts and valves out of the knee space, where chairs and legs would block them.
- Put power and data outlets above the worktop, not inside the knee space, so cables do not hang at leg level.
All sizes
| Code | Width | Depth × height | From |
|---|---|---|---|
| BC-KS-0900 | 900 mm (35½ in) | 560 × 900 mm | $520 |
| BC-KS-1200 | 1,200 mm (47 in) | 560 × 900 mm | $610 |
| BC-KS-1500 | 1,500 mm (59 in) | 560 × 900 mm | $690 |



